Tandem channel kitchen
Tandem channel kitchen: This type of kitchen is of high quality. Tandem channel is very easy to operate, this is its great quality.
The kitchen should always be constructed as per requirement.
It is very easy to open and close such channels. Its basket does not need to be pressed. If you push it for a short distance, it goes inside on its own.
In this type of kitchen door, 18mm plywood or PBC Ply is used. Plywood has a longer life because wood can withstand all weather changes, but plywood should have the ability to withstand water, either inside or outside it should be coated with ceramic and Fevicol water proof should be applied in plywood.
Tandem channel: This is a type of hydraulic pump channel which is very easy to operate. These types of channels are expensive. A skilled craftsman is required to install tandem channel.
In such channels, people are provided with screws for sitting and they are opened and fitted by the people of the channel themselves. PBC Ply is used in its lower part. And it is fitted with screws.
L hinges are used in its doors . 2 No magnets are installed. Either L hinges can be used but vle one advises that it is better to use L hinges and magnets because L hinges have a longer life and if installed properly L hinges will not require any repairs. Doesn’t happen.
Tandem Channel Size: Normally 20″ channels are installed in the kitchen. But while making it in a kitchen platform, dividers should be installed where required.
First of all, try and tandem channels should be brought as per requirement and basket and divider should be installed accordingly, this is very important.
Tray Size: Apply as per requirement. Normal type size.
- 15×19 Dip Try Size .
- 17×19 Dip Try Size .
- 21×19 Dip Try Size .
- 25×19 Dip Try Size .
Channel Size: You should choose a channel of the size as per your requirement. Different sizes of channels are available in the market. Common types of sizes:
- 4×20 channel Size .
- 6×20 channel Size .
- 8×20 channel Size .
Tandem channel Fitting –
There are many types and the method of fitting of each may be different. Whichever company’s channel is used, one should first get information about the fitting of that channel. Which makes fitting easier.
Scrow Size: Scrow and Khila should be taken as per requirement.
