Small sliding door wardrobe
Small sliding door wardrobe : 
This type of sliding wardrobe is suitable for small spaces which have 2 doors and 4 drawers. 5 Self Patiya 1 hanger pipe is installed! Sliding Door always runs on Bearing and Bottom.
Small sliding door wardrobe Size: 
Size of such wardrobe is approximately height 82 inches. The width is up to 84 inches in which the depth is kept inside 23 inches. The side plates on all four sides remain the same. The middle plate has space up to 3.2 inches for Sliding Fitting Channel.
The middle plate of height and width should be installed in the corresponding size by leaving a space of at least 6 mm from the back door. The rest Self or All should be installed at a distance of at least 30 mm from the door so that hands do not get hurt while opening the door.
This bottom is made of aluminum. A space of 3.2 inches is left for sliding fitting and before installing the bearings in the door, grooves are left in the door on both sides as per the measurement.
Sliding Door Roller Fitting
Before installing the bearings, the grooves of the upper pump are measured in the closed state and the grooves are removed leaving 18 mm more space than that measurement.
The lower bottom is applied leaving 10 mm from the edge of the ply and the upper bottom is applied leaving 3 mm. When the door is completely finalized, 8 mm by 36 mm borders are placed on all four sides.
Small Sliding 2 door wardrobe Fitting :
- 7×4 ply Board 25 mm use for Door.
- Plywood 18 mm Frame and Self .
- Plywood 8 mm Back side .
- 8×4 Limited (Sunmica) in Side .
- 8×4 Limited (Sunmica) Color out Side .
- Sliding Door Fittings Set .
- Handle 4 inch in Side .
- Handle 8 inch Out Side .
- 16 inch Drower चैनल . use by Kapat .
- Fevicol marine .
- 1/2″ × 1.4″ Wood Pati .
- 1/2″ × 1″. Wood Pati .
- Hitex .
- Abro Tape .
- Wall Pvc Plug .5mm
- 2×14 Nail (Nail)
- 1.4×14 Nail (Nail)
- 1×17 Nail (Nail)
- 3/4×19 Nail (Nail)
- 4×13 Screw.
- 6×13 Screw.
- 6×19 Screw.
- 6×25 Screw.
- 8×32 Screw.
- 8×38 Screw.
- 8×50 Screw.
- 8×60 Screw.
- 8×75 Screw.
Top Door Fitting
- L Hinges 3×1/2 × 12 mm .
- L Hinges 3×1/2 × 18 mm .
- 3×1/2 × 3/4 Plane Hinges .
- Door hydraulic pump 20kG .
