Small kitchen design ideas (Kitchen furniture materials)

Small kitchen design ideas

Small kitchen design ideas: To make a small kitchen, first of all one has to prepare a kitchen platform made of stone or water proof plywood. Water is always used in the kitchen, hence it is better to put stones in the uppermost part of the kitchen. Either the entire structure should be of stone.

If ply is used in the kitchen, then it is important that at least 8 mm green wood strip should be applied in the lower part.

Kitchen Platform Size: Small kitchen is a small sized kitchen whose length ranges from 12 feet to 6 feet. The width of the kitchen top ranges from about 30″ inch to 26″ and height is 32″ or can be made as per requirement.

The height of the vertical divider installed in the kitchen is kept from 27″ to 28″ and the width is kept from 24″ to 23″. The divider is always 2″ to 4″ inside the top so that the door handle does not come out from the top. But if the account handle is placed at the place, the divider should be 2″ inside from the top.

Also, it has to be noted that at least the thickness of the divider should be 1.2″ so that the wooden strip can be fixed from the front by punching holes.

Kitchen Basin Divider: In the kitchen, where the basin is used to clean utensils, there should be space inside the basin up to at least 36″ or the basin should be brought first and seen and accordingly 3″ should be made from all sides. Higher taxes should be imposed.

Kitchen Basket Divider: Normally the space is 16″18″22″ 20″ but in such a situation the space should not be less than this. vle one advises that 6mm more should be kept.

Kitchen Corner Divider: At least 16″ space should be left on both sides of the corner of the kitchen or it should be more than that because the firm installation of the door reduces the space due to which there is difficulty in keeping the gas cylinder or similar.

Basket Size: The common channel used in kitchen basket is from 20″ to 22″ and accordingly SS baskets are available in the market.

  • 16″ Gala 20″ Channel SS Basket Size :
  • 4x15x20-Dip. Cutlery Cup-Plate Palen.
  • 6x15x20-Dip. dees | Cup-Plate Palen.
  • 8x15x20-Dip. plate Palen.
  • 16″ Gala 22″ Channel SS Basket Size :
  • 4x15x22-Dip. Cutlery Cup-Plate Palen.
  • 6x15x22-Dip. dees | Cup-Plate Palen.
  • 8x15x22-Dip. plate Palen.
  • 18″ Gala 20″ Channel SS Basket Size :
  • 4x17x20-Dip. Cutlery Cup-Plate Palen.
  • 6x17x20-Dip. dees | Cup-Plate Palen.
  • 8x17x20-Dip. plate Palen.
  • 18″ Gala 22″ Channel SS Basket Size :
  • 4x17x22-Dip. Cutlery Cup-Plate Palen.
  • 6x17x22-Dip. dees | Cup-Plate Palen.
  • 8x17x22-Dip. plate Palen.
  • 20″ Gala 20″ Channel SS Basket Size :
  • 4x19x20-Dip. Cutlery Cup-Plate Palen.
  • 6x19x20-Dip. dees | Cup-Plate Palen.
  • 8x19x20-Dip. plate Palen.
  • 20″ Gala 22″ Channel SS Basket Size :
  • 4x19x22-Dip. Cutlery Cup-Plate Palen.
  • 6x19x22-Dip. dees | Cup-Plate Palen.
  • 8x19x22-Dip. plate Palen.
  • 22″ Gala 22″ Channel SS Basket Size :
  • 4x21x22-Dip. Cutlery Cup-Plate Palen.
  • 6x21x22-Dip. dees | Cup-Plate Palen.
  • 8x21x22-Dip. plate Palen.

    Hinges for kitchen door: Size:

  • 3″x 1/2″ x12 mm L मिजागरा (Hinjish) .
  • 3″x 1/2″ x18 mm L Mizagara (Hinjish) .
  • 3″x 1/2″ x6 mm L मिजागरा (Hinjish) .
  • 2 NO magnet is installed in the kitchen register.
  • It is necessary to install 8″ chain in the door. As per requirement.
  •  All mortars are installed on 18mm ply. If the size of ply is less then L cut size hinges will be available from Masani in the market. This is also called possession. By installing this type of hinges only the door and drawer are visible from outside. But in this, a gap of about 8 mm has to be given between two rods. At some places L Bihari Mizagara is also used. L Bihari Mizagra is used in light weight straw ply doors.
  • Vle one recommends that L Bihari hinges should be used only on the lower doors.
  • Tandem channel is also installed in the kitchen: but tandem channel can be made as per requirement. In tandem, the lower part of the plate is made of PBC and the channel is placed in it. The artisan should first bring the tandem channel as per requirement.
  • Tandem channels are much more expensive than SS baskets. But tandem channel runs very easily. A skilled artisan is required to install tandem channel.
We will be happy to hear your thoughts

Leave a reply

vle one
Logo
Compare items
  • Total (0)
Compare