King Size bed design (7’×78″)
King Size bed design- Bed is a big size bed which is also called king size. There is enough space on this bed to keep things and to sleep. It is used in big bedrooms. Due to its big size, hydraulic pump is not used in it mostly but hydraulic pump can be used as per the requirement. In such big size beds, hydraulic pump of at least 200 kg is installed but our advice is that hydraulic pump should not be installed in such big beds. In such beds, make the upper part a lid so that it can be easily lifted in different parts or make a driver in the lower part. 18 mm ply board is used to make this bed while the tiles of its lower part are made of 12 mm plywood. If you want to use a lid on the upper side, then the lid is also made of about 12 mm ply but it is very important to have support on the inside side. Whereas if you go to install a hydraulic pump, then its ply should be made of 18 mm ply and the border that is made on the top should be a little round on the sides. The border in the upper part is made of 3 inches and 1.5 inches so that one does not get hurt while moving. The inside size of the bed where the mattress is placed is 72 inches wide and 78 inches long whereas the outside size is 7 feet long and 78 inches wide. The 78 inch width increases because the 3 inch border design in the upper part increases the space by 3 inches.
The materials used in this bed are as follows:
- Plywood 18 mm.
- Plywood 12 mm.
- Laminates (Sunmica).
- 3×1×1 Hinges.
- Fevicol Marine
- Hitex fevicol (SR)
- Hydraulic Pump Fitting for bed.
- Abro Tape.
- Bed socket.
- 2×1 Wood Patti.
- 1½×1 Wood Patti.
- 1×½ Wood Patti.
- 19×6 Screen, 25×6 Screen, 32×8 Screen, 38×8 Screw, 50×8 Screw, 75×8 Screw.
- 19×¾” Nail, 1″×17 Nail, 14×1½” Nail, 14×2″ Nail, 17×1¼ Nail.
