7 feet wardrobe design
7 Feet Wardrobe Design: This type of wardrobe is made of plywood or wood in which clothes and jewellery are kept. Money, documents and children’s toys are kept safe in it. Nowadays documents should be kept in the wardrobe because these are the most valuable documents. Money and documents are kept inside the drawer so that it is easy to take them out. Another advantage of keeping them inside the drawer is that locks can be easily installed inside the drawer, which doubles the security of the things kept in the wardrobe.
Bedroom cabinet of the future: This type of wardrobe has drawers and doors /
A 1 inch rod pipe is fitted in the upper part of the wardrobe for hanging clothes leaving a height of 36 inches to 38 inches. Drawers are fitted in the lower part of the center partition and then shelves or tri drawers are fitted in the lower part. The advantage of using tri drawers is that the clothes and items kept in the lower part can be easily taken out by train as there are channels fitted in the drawers.
Wardrobe with L doors. Z | and plain hinges /
7 feet wardrobe design: Most of the wardrobe sizes are made according to the space but the depth of the wardrobe should not be less than 18 inches, otherwise clothes hangers cannot be hung in the wardrobe.
The width of this type of door is up to 7 feet and height up to 82 inches and depth is more than 18 feet or the length, width and depth can be increased according to the space. The width of this type of door should not exceed 22 inches. An 18-inch door is the normal size.
But this cannot be done in terrace doors because in sliding doors the width should always not exceed the height, otherwise the terrace door will not swing properly.
The depth of the sliding wardrobe should be kept minimum 22 inches and a border strip of 1.4 inch x 10 mm is fitted on the outer edge and a 16 inch drawer channel is fitted in this wardrobe. The self size is up to 18 inches. The middle height plate is 19 inches. The ceiling door always runs on bearings with aluminium bottom plates fitted at the top and bottom. The drawer in the sliding wardrobe always remains on the side, which makes it easy to open the drawer.
Materials used for making doors and cabinets:
- Plywood 18mm frame.
- Plywood 8mm back side.
- Ply board 25mm door.
- 8 by 4 (liminate) sunmica.
- Kg Fevicol Marine.
- 6 inch handle.
- 8 inch handle.
- 2 No magnet.
- 8 inch door chain.
- Abro Tape.
- 1 Inch SS Pipe & Socket.
- 16 inch drawer channel. For 18 inch deep closet doors and 22 inch deep sill doors.
- 3×3/4×12mm Hinged L.25mm Door.
- 3×3/4×18mm Hinged L.25mm Door.
- 3×3/4×6mm hinged L.25mm door.
- Hinge plan.
- 3×1/2×12mm Hinge L.18mm Door.
- 3×1/2×18mm Hinge L.18mm Door.
- 3×1/2×6mm hinged L.18mm door.
- 4×13 screws.
- 6×13 screws.
- 6×19 screws.
- 6×25 screws.
- 8×32 screws.
- 8×38 screws.
- 8×50 screws.
- 8×60 screws.
- 3/4×19 nails.
- 2×14 nails.
- 1.4×14 nails.
