5 feet Wardrobe Design
This is a 5 feet wardrobe design. Three doors are made in this type of wardrobe and it is very attractive. This type of wardrobe can be easily made in a room of 8 by 8. Two drivers and self drivers are also made in a 5 feet wardrobe.
The advantage of self driver is that the driver can be pulled out without putting hands inside. After placing clothes on it, it is then pushed inside, which reduces bending to take out clothes. A hanger pipe is installed in it and self is installed in the last door. If there is a space on the upper side, doors are made on it and a pump can also be installed in it so that the door can be lifted easily.
5 feet wardrobe height is 7 feet, width is 60 inches and depth is up to 23 inches.
For making such a wardrobe, frames of 18 mm ply are made from all sides and the outer door of the wardrobe is made of 25 mm ply board and the door at the top is made of 18 mm plywood and real hinges can always be used in it, but the hinges that are installed in the door are installed in L hinges. The maximum width of such a door is up to 24 inches and the self is 20 inches in which the driver channel is fitted with 16 inches. Its locks are fitted at the center of 38 inches and the handle is at the top of 42 inches. This type of door is used to keep valuables, clothes and toys.
Plain hinge is used in the top door which opens easily in a gap of 6mm by 6mm. The hydraulic pump of this door is of 15kg and 30kg in which 15kg is for small door and 30kg is for big door which can lift and close the top door easily.
- Wardrobe Size: 60L”×74H”×23D.
- Top Door Size: 21H”×36C” and 21H”×60C”.
Materials required for a 5 feet Wardrobe Design.
- Plywood 18mm frame.
- Plywood 8mm back side.
- Ply board 25mm door.
- 8 by 4 (liminate) sunmica.
- Kg Fevicol Marine.
- 6 inch handle.
- 8 inch handle.
- 2 No magnet.
- 8 inch door chain.
- Abro Tape.
- 1 Inch SS Pipe & Socket.
- Requirement drawer channel.
- 3×3/4×12mm Hinged L.25mm Door.
- 3×3/4×18mm Hinged L.25mm Door.
- 3×3/4×6mm hinged L.25mm door.
- 3″ ×½×¾ Hinge plan. Top Side And Space 6mm by 6mm
- Z Hinge.
- 3×1/2×12mm Hinge L.18mm Door.
- 3×1/2×18mm Hinge L.18mm Door.
- 3×1/2×6mm hinged L.18mm door.
- 20mm Locks For drawer And 29mm Locks For 25mm Door.
- 8 Inch Tower Bolt | Door Stopper
- 8 Inch L Tower Bolt | Door Stopper
- 1×½ Wood Pati.
- 1¼×½ Wood Pati.
- 4×13 screws.
- 6×13 screws.
- 4×13 screws For Magnet.
- 6×19 screws.
- 6×25 screws.
- 8×32 screws.
- 8×38 screws.
- 8×50 screws.
- 8×60 screws.
- 3/4×19 nails.
- 2×14 nails.
- 1.4×14 nails.
